AOC 931SN - SETUP; Stand and Angle Adjustment

- 5 -
SETUP
Setup the stand and base
Please setup or remove the base following below steps.
Adjusting Viewing Angle
 For optimal viewing it is recommended to look at the full face of the monitor, then adjust the
monitor's angle to your own preference.
 Hold the stand so you do not topple the monitor when you change the monitor's angle.
 You are able to adjust the monitor's angle from -5°to 20 °.
NOTE:
Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD
screen.