To Next Page

To Previous Page

CONNECTING THE MONITOR

Cable connections at the back of monitor:

1. Power Input 7. USB Port

SD Card Slot (SD/SDHC/SDXC/

MMC/MS/MS-Pro)

8. USB Port (Micro USB)

3. D-SUB Signal Input 9. USB Port

4. HDMI Signal Input 10. Audio In

5. RJ45 (10/100Mbps) 11. Earphone Out

6. USB Port 12. Kensington Lock

To protect equipment, always turn off the PC and monitor before connecting.

1. Connect the power cable to the AC port on the back of the monitor.

2. Connect one end of the 15-pin D-Sub cable to the back of the monitor and connect the other

end to the computer’s D-Sub port.

3. Optional – (Requires a video card with HDMI port) – Connect one end of the HDMI cable to

the back of the monitor and connect the other end to the computer’s HDMI port.

4. Turn on your monitor and computer.

5. Video content supporting resolution: VGA / HDMI: 1600 x 900/60Hz (A2072PWH);1920 x

1080/60Hz(A2272PWH/A2472PWH).

If your monitor displays an image, installation is complete. If it does not display an image, please

refer Troubleshooting on page 45.

Questions and Answers:

Need help?

Do you have a question about the AOC A2072PWH and is the answer not in the manual?

AOC A2072PWH Specifications

General