AOC AG271UG User Manual

25
OSD Setup
1. Press (Menu) to display menu.
2. Press< or >to select (OSD Setup), and press to enter.
3. Press< or >to select submenu, and press to enter.
4. Press< or >to adjust.
5. Press to exit
.
OSD Setup
Language
Set OSD display language to
English.（English is default setting
）
English, Français, Español,
Português, Deutsch,
Italiano,Nederlands,Suomi
,
Svenska, Polski, Čeština,
Русский, 한국어, 繁体中
文, 简体中文, 日本语
Timeout
Adjust the OSD timeout.
Each step will increase / decrease
value by 5
5-120
H. Position
Adjust the horizontal position of
the OSD. Each step will increase /
decrease value by 25
0-100
V. Position
Adjust the vertical position of the
OSD. Each step will increase /
decrease value by 5
0-100
Transparence
Adjust the OSD transparent each
step will increase/decrease value
by 25
0-100
Break Reminder
Break Reminder if the user
continuely work for mare than 1
hurs
ON/OFF
Note：
1） If turn on, a time break reminder message is generated for each hour (1, 2, 3 ……24 hours, > 24 hours),
the message will be showed for 10 sec. Also, the message will disappear when press any function key.
2） The message location is at the default screen center position and cannot change via OSD.
3） When power on/off, DC on/off, or enter/exit power saving mode, the working time is to clear and recalculate.
4） OSD time out can save data.

AOC AG271UG Specifications

General

Tiltable	yes
OS Compatibility	windows
Screen Size	27 inches
Aspect Ratio	16:9
Resolution	3840 x 2160
Native Resolution	3840 x 2160
Refresh Rate	60hz
Horizontal Viewing Angle	178 degrees
Vertical Viewing Angle	178 degrees
Response Time	4 milliseconds
Brightness	300 candela per square meter
Contrast Ratio	20, 000, 000:1
Horizontal Scan Rate	140 kilohertz
Power Consumption	50 watts
Width with Stand	24.5 inches
Net Weight without Stand	15.0 pounds