Extra
1 Press
(Menu) to display menu.
2 Press < or > to select
(Extra), and press to enter.
3 Press < or > to select submenu, and press
to enter.
4 Press < or > to adjust.
5 Press
to exit.
Input Select Analog / DVI Select input signal source.
Auto Config. yes or no Auto adjust the picture to default.
Off timer 0-24hrs Select DC off time.
Select wide or 4:3 format for display.
Turn ON/OFF DDC-CI Support.
Reset
yes or no Reset the menu to default.
Information
Show the information of the main image
and sub-image source.
To Next Page
Loading...
