18
Hotkeys
Power
Press the Power button to turn on/off the monitor.
Menu/Enter
Press to display the OSD or confirm the selection.
Eco (DCR)/ -
Press the Eco key continuously to select the Eco mode of brightness and DCR on when there is no OSD. (Eco
mode hot key may not be available in all models).
Source/Auto / Exit
When the OSD is closed, press Auto/Source/Exit button continuously about 2 second to do auto configure (only for
the models with dual or more inputs).
When the OSD is closed, press Auto/Source/Exit button will be Source hot key function (Only for the models with
dual or more inputs).
4:3 or wide image ratio /Volume >
When there is no OSD and VGA input only, press hotkey continuously to change 4:3 or wide image ratio.
(If the product screen size
is 4:3 or input signal resolution is wide format, the hot key is disable to adjust
and also only available for
VGA input )
when HDMI input, press hotkey continuously to activate Volume, and press the Up or Down to change
the setting, press Menu button for confirmation and exit OSD. this only available for HDMI input
To Next Page
Loading...
Need help?
General
