Extra
1 Press MENU to display menu.
2 Press - or + to select (Extra), and press MENU to enter.
3 Press
- or + to select submenu, and press MENU to enter.
4 Press - or + to adjust.
5 Press AUTO to exit.
Input Select Auto / Analog / DVI / HDMI Select input signal source.
Auto Config yes or no Auto adjust the picture to default.
Off timer 0-24hrs Select DC off time.
Image Ratio wide or 4:3 Select wide or 4:3 format for display.
DDC-CI yes or no Turn ON/OFF DDC-CI Support.
Reset
yes or no Reset the menu to default.
Information
Show the information of the main image and sub-image
source.
To Next Page
Loading...
Need help?
General
