21
Electronic Program Guide (EPG)
Press the GUIDE button on the remote control and the program information for the channel you
are watching will be displayed on the screen. This function is only available when in DTV source.
* The picture here shows an example of the GUIDE screen in a DTV source.
Channel Select
Press number key or ▼CH▲ button to select your desired channel.
1. ATV
The “-” button has no function in ATV mode. Directly press the number buttons to select
channels.
2. DTV
Use“-＂button to select the sub channel in DTV.
Ex: Your desired number is 80-3.
Press 8 → press 0 → press“-＂→ press 3.
• Whether in ATV or DTV, after you input the channel numbers, press ENTER button to direct
to the channel immediately, or wait for 3 seconds to change automatically.
• Return to the previous channel, press LAST button.
Note: Please refer to channel menu on page 33. for TV channels set up when initial use.
List
Press LIST button and there will be a small window showing program list, you can scroll through
the list to select the channel you want directly without using the ▼▲ button.
To Next Page
Loading...
Need help?
General
