OSD Setting
Basic and simple instruction on the control keys.
1. Press the MENU-button to activate the OSD window.
2. Press or to navigate through the functions. Once the desired function is highlighted, press the to
activate it. If there is a sub-menu, press or to navigate through the sub-menu functions.
3. Press or to change the settings of the selected function. Press to exit. If you want to adjust any
other function, repeat steps 2-3.
4. OSD Lock Function: To lock the OSD, press and hold the MENU-button while the monitor is off and then
press power button to turn the monitor on. To un-lock the OSD - press and hold the MENU-button
while the monitor is off and then press power button to turn the monitor on.
Notes:
1. If the product has only one signal input, the item of "Input Select" is disabled.
2. If the product screen size is 4:3 or input signal resolution is native resolution, the item of "Image Ratio" is
disabled.
3. Open DCR, Color Boost and Picture Boost functions is activated; the other two functions are turned off
accordingly.
To Next Page
Loading...
Need help?
General
