16
Using S-Video (AV-2)
Connecting your DVD Player (Good):
1. Turn off the TV and DVD player.
2. Connect the S-Video jack on the rear of your DVD player to the S-Video jack in the AV group on the rear of the
TV.
3. Connect an audio cable (white and red connectors) to the audio output connectors associated with the S-Video
output on your DVD player and connect the other end to the audio connectors associated with the AV input on the
rear of the TV.
4. Turn on the TV and DVD player.
5. Select AV-2 using the SOURCE button on the Remote control or the INPUT keypad on the side of the TV, or
directly by pressing the VIDEO button on the Remote Control.
Using Composite (AV) Video
Connecting your DVD Player (Good)
1. Turn off the TV and DVD player.
2. Connect the Video (yellow color) connector on your DVD player to the Video (yellow color) connector in the AV
group.
3. Connect the R (red color) and L (white color) audio connectors on your DVD player to the corresponding R (red
color) and L (white color) audio input connectors in the AV group.
4. Turn on the TV and DVD Player.
5. Select AV using the SOURCE button on the Remote control or the INPUT keypad on the side of the TV or directly
by pressing the VIDEO button on the Remote Control.
To Next Page
Loading...
