25
Connecting to a PC Computer
1. Turn off the power to the TV and PC Computer.
2. Connect a 15-pin D-Sub RGB (VGA) cable to the RGB output of
your pc computer and the other end to the PC IN port at the rear of
the TV.
3. Connect the Audio Out on your pc computer to the PC Audio input
at the rear of the TV.
4. Turn on the TV and PC Computer.
5. Select PC using the INPUT button on the remote, side of the TV or
directly by pressing the PC/HDMI button on the Remote.
Note: For the best picture quality when connecting a PC computer through
RGB PC, set your PC computer timing mode to native resolution of panel.
Please refer to the PC or graphic card’s user guide for additional
information on how to set the timing mode and the video output
requirements of the product.
To Next Page
Loading...
Need help?
General
