32” LCD TV AOC L32W751A
If you turn the TV on standby mode after setting the sleep timer, setting will be erased. Set it again.
Bule screen : To have a blue screen when there is no video input or when the RF signal is very bad.
Using < / > buttons select On.
Select Off if you do not want the blue screen.
Teletext Language : Using < / > buttons, select the character set that will be used for Teletext on this channel.
The character set determines how characters are displayed on Teletext screen.
Reset : Return to default settings. Press the OK or < / > buttons to return to default settings.
Press the MENU button to exit the Options menu.
Note : this menu is removed automatically after a few seconds without using the remote control.
PC Setup :
In PC Setup, main menu is different from the one in TV Installation Setup(TV setup). Please select PC as main input.
H Position : use the < / > buttons to move the picture horizontally on the screen.
V Position : use the < / > buttons to move the picture vertically on the screen.
Phase : use the < / > buttons to move the picture phase on the screen.
Auto Sync : this function is used to automatically adjust the VGA input. Press the < / > buttons to start the adjustment
process.
Colour temp. : to select the colour temperature at your convenience.
Reset : Return to default settings. Press the OK or < / > buttons to return to default settings.
Installation Setup :
Installation Setup involes selecting all the settings required to be able to search for and store all the channels you
can receive.
Make sure that the television is switched on and follow all the steps in turn specified on this page.
To Next Page
Loading...
Need help?
General
