32” LCD TV AOC L32W751A
User can set up Program schedule list
Time Line Schedule EPG
Extended Schedule EPG information is presented using a list format, either on a banner for the current service, or as
a full screen dialog showing multiple services.
Configuration
Time Zone: Press RIGHT/LEFT to select the time zone you are in. Press DTV MENU to exit this screen. (Inc.
GMT/CET)
DST: Press RIGHT/LEFT to select or deselect DST mode, Press DTV MENU to exit this screen.
Subtitle: Press RIGHT/LEFT to select subtitle on or Off, Press DTV MENU to exit this screen.
Banner: 2/4 seconds.
Favorite Mode: Press RIGHT/LEFT then select to choose favourite mode. Press DTV MENU to exit this screen.
Please remember that at least one favourite channel be selected before turning favourites on.
Channel List: Press RIGHT/LEFT then select to choose channel list mode, you can select show all channel, TV only,
Radio only and Text only, Press DTV MENU to exit this screen.
Parental Settings: Press SELECT to enter the parental lock menu. Press DTV MENU to exit this screen.
If you don‟t know how to use above function, you can select i info button in remote control for get information, press i
info button again will exit.
Language Settings
System: To change the system languages, this changes the language used in all menus and dialogs.
Noted: Pan Europe system language include: English, German, French, Italian, Spanish, Danish, Norwegian,
Swedish, Finish, Portuguese, Polish and Dutch.
UK system language includes: English, Welsh and Gaelic.
Audio: Displays a dialog enabling the preferred language to be set, this is the language to be used for all channels if
it is available.
Subtitle: Displays a dialog enabling the preferred language to be set, this is the language to be used for all channels
if it is available.
Current: Displays a dialog enabling the current language to be set, this is the language to be used for the current
selected channel, please note that only languages available with the currently selected channel will be displayed.
Automatic Search
Automatic search is the ability for the reference application to scan each other (Frequency) for services.
Whilst performing an automatic tune no service will be selected. A dialog is displayed during automatic tuning that
shows the progress of the scan through the channels.
The user may cancel automatic tuning. If the previous list already stored, the lowest number from the service list, it
will return to “normal viewing” operation.
To Next Page
Loading...
Need help?
General
