10
To use the menus
1. Press the MENU button to display or close main menu.
2. Use the cursor up/down to select a menu item.
3. Use the cursor left/right to enter a submenu or enable/disable the
function.
4. Press the MENU button to exit the menu.
MAIN MENU
Press the MENU button to enter the main OSD (On Screen Display). Adjust the
items including Picture Setup, Sound setup, Options Setup, Installation
Setup(TV setup) and PC Setup(only in pc mode).
Picture Setup:
Preset : choose between Standard, Mild, Personal,Vivid.
Personal gives access to following adjustments.
Contrast, Brightness, Colour, and Sharpness : adjust these settings as required
using the < / > buttons.
Tint : This option is only available for NTSC audio-visual sources.
Reset : Return to default settings.Press OK or < / > buttons to return to default
settings.
Press the MENU button to exit the Picture menu.
Note : this menu is removed automatically after a few seconds without using the
remote control.
When you adjust a menu option (Contrast for example), the menu is replaced
by a sub-menu as illustrated.Press the OK button to return to the Picture menu.
Sound Setup :
To Next Page
Loading...
Need help?
General
