18
DTV MENU (L32W781A)
First-Time Installation
When the system is first switched on, the Reference Application attempts to
configure itself for the first time. This is called ”First Time Installation”.
The user is then asked if they wish to perform an automatic tune for services.
Automatic tuning functionality is described later in this document. When the
automatic tune finishes and services have been found, the lowest number
service is selected and a banner describing that service is shown. A user may
have chosen not to perform an automatic tune or no services may have been
found by an automatic scan. In this instance the user may use the “Main Menu”
to automatically scan again or perform a manual scan. The Reference
Application also provides the facility for the user to force to trigger a “First Time
Installation”. This facility can be found in the “Main Menu” under the
“Installation” option.
Main Menu
Channel list
Favourites
Guides
Settings
Common Interface
A “Main Menu” is provided to enable the user to configure elements of the
Reference Application. In “normal viewing” operation a user can access the
“Main Menu” by pressing the “DTVMENU” key. The “Main Menu” is
hierarchically organized into categories in order to fit on the screen.
Channel List
A user may configure the Reference Application to use exclusively TV, Radio or
Data services, this feature is know as channel List Model.
A user can select a channel List Mode using the configuration dialog; it is
permitted to select a channel List Mode that contains no services.
When the channel list mode is enabled the program up and down buttons on
the remote control will only select those services in the current channel List
Mode. And all EPGs will only show those services in the current Channel List
Mode. It is still possible to select a service using the services even if it is not a
member of the currently selected channel List Mode. Note that if the user has
selected a favourites list then the Channel List Mode acts as a filter on top of the
selected favourites list.
Please press the OK button on your remote control to tune to the highlighted
channel. Press DTV MENU to exit this screen.
To Next Page
Loading...
Need help?
General
