33
Use universal/Sky remote to control AOC TVs:
The power ON/STB, VOL +/-, CH Up/Dn of AOC LCD TVs (most models sold
since 2006) can be operated by universal control or Sky remote control.
The three digits code is "606"
.
Setup procedures on Sky remote control:
1. Press "tv" key on SKY remote to enter TV mode, turn on AOC TV.
2. Press and hold "select" and "red" keys on Sky remote simultaneous for about
1.5 seconds until LED blinks twice.
3. Enter "606" 3 digits code.
4. Press and hold "select" key on Sky remote untile LED blink twice to confirm
this is a valid code.
5. Aims Sky remote at TV and press "ON/OFF" key should turn off TV.
Please follow the instructions come with the universal remote control to setup
your remote control or contact with its manufacture if any problem occurred.
To Previous Page
Loading...
Need help?
General
