42″LCD TV AOC L42H861
10. VGA Set: This option only shows and is available in VGA mode, which provides several items for the VGA
display fine tuning, such as : 【H-Position】、【V-Position】、【Clock】and 【Phase】. All these items giving the tuning
range from 0 to 100.【Setting】item provides the default VGA setting values restoring.
2.3 How to Connect
Coaxial (RF)
Using Your Antenna or Digital Cable for DTV
1. Turn off the power to the HDTV.
2. Connect the coaxial (RF) connector from your antenna or digital cable (out-of-the-wall, not from the Cable
Box) to the ANTENNA/CABLE DIGITAL/ANALOG connector.
3. Turn on the power to the HDTV.
4. Select DTV using the INPUT button on the remote, side of the HDTV or directly by pressing the TV button on
the Remote Control.
Using Your Antenna or Cable for TV
1. Turn off the power to the HDTV.
2. Connect the coaxial (RF) connector from your antenna or cable (out-of-the-wall, not from the Cable Box) to
the ANTENNA/CABLE DIGITAL/ANALOG connector at the rear of the HDTV
3. Turn on the power to the HDTV.
4. Select TV using the INPUT button on the remote, side of the HDTV or directly by pressing the TV button on
the Remote Control.
To Next Page
Loading...
