Setting Adjust
SETTING
Move Select
Menu Timeout
Sleep Timer
DCR
DCC
B/L Control
V-Chip
Menu Language
English
20s
Closed Caption
Reset All
Off
On
Off
100
Exit
1
Menu
Press Menu key and the Menu screen displays.
2
Press ▲/▼ to select “SETTING”
，
then press OK.
3
Press ▲/▼ to select item for adjusting including : Menu Language, Menu Timeout, Sleep Timer, DCC, DCR, B/L
Control, V-Chip, Closed Caption, Reset All, then press OK to enter selected item.
4
Press ◄/► to adjust.
5
Menu
Press Menu key to exit.
Items Description
Menu Language Select menu language for your TV set.
Menu Timeout Set up period of time that the menu screen displays.
Sleep Timer
Set up period of idle time before your TV set entering the standby mode automatically (inactive for computer/USB
modes).
DCC Set up the contrast of your TV set to its maximum value.
DCR Set up the contrast of your TV set to vary in accordance with the brightness and darkness of your TV set.
B/L Control
Adjust brightness of your screen. (You may experience a quick white flash when power on a TV set with very low
back light value.This is normal. In case of dynamic contrast this item is hidden.)
V-Chip
When the user select the V-Chip item and a rating table will show in the screen and user can setting the rating to
be lock or unlock.
Closed Caption
There are CC1/CC2/CC3/CC4/TT1/TT2/TT3/TT4 can be choose.
Choose “CC On”, “CC With Mute” this function will be enabled.
When “CC Off”, this function will be disabled.
Reset All Reset all setup values to the default settings.
To Next Page
Need help?
General
