LM914
20
FOR FIRST TIME INSTALL :
This is a Plug & Play LCD monitor. Turn off the PC then connect the
cables. Power on the PC and it will automatically detect your new monitor.
The Windows Operating system will automatically install a plug & play
driver for it. If you would still like to install the driver included in the
diskette that came with the monitor, log-on to our website at
www.aocmonitor.com/support/faq.asp.
Then look for “Installing the Driver”
section.
HOW TO INSTALL THE DRIVER-DISK (INF & ICM FILE)
To Next Page
Loading...
