24
OSD Setup
OSD Setup
Language English
Timeout 10
H. Position 100
Transparence 25
Break Reminder O
USB O
USB Selection Auto
Language Select the OSD language
Timeout 5-120 Adjust the OSD Timeout
H. Position 0-100 Adjust the horizontal position of OSD
Transparence 0-100 Adjust the transparence of OSD
Break Reminder On /Off Break reminder if the user continuously work for more than 1hrs
USB Off / 2.0 / 3.2Gen1
For model need to turn on/off USB power during power saving
.
The default USB setting is Off. If you want to connect USB-C device,
please adjust the USB setting to 2.0 or 3.2Gen1.
USB Selection
Auto / USB C / USB
up
Auto : switch with display input source
USB C / USB up : x up stream not change with input source
To Next Page
Loading...
