OSD Setting
Basic and simple instruction on the control keys.
1. Press any key to display the control menu.
2. Press the MENU-button to activate the OSD window.
3. Press or to navigate through the functions. Once the desired function is highlighted,
press the Enter-button to activate it. If there is a sub-menu, press or to navigate through the
sub-menu functions.
4. Press or to change the settings of the selected function. Press EXIT to exit. If you want to adjust
any other function, repeat steps 2-3.
5. OSD Lock Function: To lock the OSD, press and hold the MENU-button while the monitor is off and then
press power button to turn the monitor on. To un-lock the OSD - press and hold the MENU-button
while the monitor is off and then press power button to turn the monitor on.
Notes:
1. If the product has only one signal input, the item of "Input Select" is disabled.
2. If the product screen size is 4:3 or input signal resolution is native resolution, the item of "Image Ratio" is
disabled.
3. One of Clear vision, DCR, Color Boost, and Picture Boost functions is activated; the other three functions are
turned off accordingly.
To Next Page
Loading...
