AOC U3277PWQU - Additional Monitor Settings; Input Selection and Auto Configuration; Image Ratio and OSD Reset

30
PBP
Main Source
D-sub DVI HDMI/MHL DP
SUB Source
D-sub ∨ ∨ ∨ ∨
DVI ∨ ∨ ∨ ∨
HDMI/MHL ∨ ∨ ∨ ∨
DP ∨ ∨ ∨ ∨
Extra
1 Press MENU (Menu) to display menu.
2 Press
or to select (Extra), and press MENU to enter.
3 Press
or to select submenu.
4 Press
or to adjust.
5 Press
AUTO to exit.
Input Select
Auto Auto Detect input signal
D-SUB Select D-SUB signal source as input
DVI Select DVI signal source as input
HDMI/MHL Select HDMI/MHL signal Source as input
DP Select DP signal Source as input
Auto Config.
Yes / No Auto adjust.the picture to default.
Off Timer 0-24 hrs Select DC off time.
Image Ratio
Wide
16:9 or 16:10
4:3
4:3 or 5:4
Movie 1
over scan: Top 9% ; Down 9%
Movie 2
over scan: Top 9% ; Down 17%.
1:1
Native resolution
DDC/CI Yes / No Turn on or off DDC/CI Support.
Reset Yes / No Reset the menu to default.
Notes:
1. If the DP video content supports DP1.2, please select DP1.2 for DP Capability; otherwise, please select DP1.1.
2. movie1 and movie2 only support digital source.
3. Image Ratio and PIP/PBP can be only one.
4. movie1 and movie2 only support Video Timing(example:480I,480P,576I,576P,720P, 1 0 80i,1080P)