AODELAN E3+ - Page 18

16
5. Check the operation
Press the master unit’s test ash button (charge lamp). The slave unit ash
will re. If not, check that it is placed within the operation range.
Remote Release
While performing wireless shooting, you can release camera shutter
remotely from slave unit that using E3
+
receiver. Simply by pressing function
button 4 <
Rel
>on the E3
+
receiver, you can perform remote release (remote
control shooting). For master unit operations, see instruction manual of
E3
+
transmitter, Canon ST-E3-RT Speedlite transmitter or ash based on
personal choice of transmitting devices.
Color Status
Lit
Lit
Blinking
Lit
Green
Red
Blue
Description Action
Check the channel and ID
_
Master Units + slave units =
16units or less
Turn the power off and on
again
Transmission OK
No connected
Too many units
Error
Shortly lit when E3
+
receiver sends flash
or remote release
order