AODELAN E3+ - LCD Display Modes; ETTL;ETTL II Autoflash Display

15
transmission channel parameter will ash on the LCD; press function button
2< > or 3< >to select from Ch. 1-15 or Auto; press power button or
function button 4<
>to exit the setting.
Setting the wireless radio ID: press function button 2 <
>, the thousands
digit will ash on the LCD; press function button 1 < > to select the ID digit
to set; press function button 2< > or 3< > to select ID number from 0-9;
press power button or function button 4 < >to exit setting for each digit.
3.Positioning the ash and camera
Position the camera and ash within the range of wireless radio transmission.
4.Check the transmission status
Check that the radio transmission conrmation lamp is lit green. Icons
and
are displayed on the receiver’s LCD screen.
The color of radio transmission conrmation lamp changes depending on the
transmission status of the master unit and the slave unit.