Need help?Do you have a question about the AODELAN E4 and is the answer not in the manual?
Essential safety precautions before using the product, including handling and environmental considerations.
Statement of compliance with EU essential requirements and relevant provisions of Directive 2014/53/EU.
Lists product name, model, FCC and IC IDs, and manufacturer details.
Details FCC compliance, potential interference, and RF exposure guidelines for the device.
Warning regarding battery replacement type and proper disposal of used batteries.
Compliance with Industry Canada license-exempt RSS standards and digital apparatus compliance.
Equipment compliance with Canadian radiation exposure limits for uncontrolled environments.
Conditions for OEM integrators regarding transmitter co-location and end-product testing.
Conditions affecting Canada authorization validity and OEM re-evaluation responsibilities.
Requirement for labeling the final product with its IC ID in a visible area.
OEM's duty to include regulatory info and warnings in the end-user manual.
Diagram showing the E4 display layout and its various sections and indicators.
Detailed list of all physical parts and buttons of the E4 wireless flash trigger.
Step-by-step guide for installing AAA batteries into the E4 transmitter.
Important notes regarding battery level indicators and replacement.
Instructions for powering the E4 transmitter on and off using the power button.
Procedure for mounting the E4 onto a camera's hot shoe and securing it.
How to select one of eight specific frequencies for radio communication.
How to assign flashes to groups (A, B, C) for remote radio control.
Switching between TTL (automatic) and Manual exposure modes.
Choosing synchronization timing: 1st curtain, 2nd curtain, or High Speed Sync.
Explanation of HSS for faster shutter speeds and its precautions.
Adjusting flash heads, modeling lights, and energy levels for groups remotely.
How E4 confirms commands, especially when flash output reaches limits.
Using the test button and managing button beep feedback.
Details on the auto power off feature and how to deactivate it.
Procedure to reset the E4 to its original factory default settings.
Power saving, relay state, and firmware update procedures for the E4.
General precautions before starting operations, ensuring units are off and then on.
Steps for connecting E4 to camera, setting flashes, channels, groups, and testing.
Adjusting relative light output for groups A, B, C and controlling modeling lights in TTL mode.
Manually adjusting light output for groups A, B, C and controlling modeling lights in Manual mode.
Table detailing indicator behavior for different operational states of the E4.
Key technical details including frequency, range, channels, power, modes, and dimensions.
Device compliance with FCC rules, potential interference, and modification warnings.
Compliance with FCC radiation exposure limits for uncontrolled environments.
Device compliance with Industry Canada license-exempt RSS standards and digital apparatus rules.
General| Brand | AODELAN |
|---|---|
| Model | E4 |
| Category | Transmitter |
| Language | English |
To Next Page