Precautions for Use
Turn off all devices – flashes/strobes, cameras,
and AODELAN FT-8 transmitters and receivers -
when connecting and disconnecting devices.
FT-8 is designed to work with camera and ash in
manual mode and has no TTL functions.
FT-8 receiver will re hot shoe ashes that are
triggered from the center contact pin.
Some third party ashes that are triggered from
auxiliary hot shoe pins will not be triggered when
used on the FT-8 receiver hot shoe.
Flashes will be triggered via sync cable if the ash
has a sync port.
• 7 •
To Next Page
Loading...