AODELAN WTR-2 - Timer Program Management; Starting and Stopping Timer Programs; Bracketed Long Exposure (BKLN) Function

4. The left and right Adjustment Buttons will move from
hours minutes, seconds, and part seconds. The left
and right Adjustment Buttons will also move to the
next or previous timer function.
[ Note ]
Note: The
DELAY, LONG, INTVL
and
N
functions can
be used together. A program using one or all of these
functions can be created.
Starting and Stopping the Timer
1. Pressing the Play / Stop Button will start programmed
timer functions.
2. Pressing the Play / Stop Button will stop a running
program.
The BKLN Function
The Bracketed Long Exposure function allows a group
of photos to be taken at automatically exponentially
changing exposure times.
1. Set the camera to B Bulb mode.
2. Selected
BKLN
in the timer mode.
3. Press the Set Button and the up arrow Selection
Button to turn on
BKLN
mode on.
4. Set your exposure time under the
LONG
timer mode.
5. Set the number of exposures under the
N
timer mode.
The number of exposures can be set from 1 to 7.
6. Pressing the Play / Stop Button will start the program.
The AODELAN Timer will double the exposure time (one
stop) set under the LONG setting for each of the number
of frames set under the N setting.
• 13 •