"Maintenance" menu E
NTA47230-300A6 91 / 101
Emission:
This function allows you to adjust the emission more finely according to the output connector assembly used and the
transmitter's measurement current. This adjustment is to be carried out for the 2 gauges (400 Ohm and 3500 Ohm).
Calibration date:
Should the device undergo calibration, you can enter the date of this calibration and the certificate reference number.
E.5 “About the instrument” menu
In the Configuration/Setup/About menu, you can find out:
The instrument part number
The Serial number
The software version
The name of the company
To Next Page
Loading...
