To Next PageTo Next Page
Need help?Do you have a question about the AOIP TC6621 and is the answer not in the manual?
General| Brand | AOIP |
|---|---|
| Model | TC6621 |
| Category | Measuring Instruments |
| Language | English |
Details the warranty period, exclusions, and limitations of AOIP S.A.S. for the product.
Overview of the TC-TM66XX range of temperature measurement and calibration devices.
Details the TC-TM66XX models and their measurement/simulation capabilities.
Lists the general characteristics and available optional parts for the instrument.
States compliance with electrical safety and EMC directives for measuring instruments.
Specifies operating, storage, and transport temperature and humidity ranges.
Emphasizes following instructions for safe operation and warns against unauthorized use.
Details precautions for using measuring wires and avoiding electrical hazards during measurements.
Describes signs of potential damage to protection or the unit's accuracy.
Explains categories, pollution degrees, and common symbols used in the manual.
Outlines essential safety rules and procedures for unit setup and maintenance operations.
Instructions for powering the instrument on and off, and battery replacement.
Details how to open the compartment, insert batteries, and check polarity.
Details the function of the mini B USB connector for software updates and adjustments.
Explains the seven horizontal fields of the graphic LCD display and their meanings.
Describes the two primary operating modes: Measurement and Simulation.
Details the gauge, resolution, scope, and scaling for constant voltage measurement.
Lists maximum voltage and load impedance limits for voltage gauges.
Specifies gauge, resolution, scope, and scaling for resistance and temperature measurement.
Guides on selecting measurement type and configuring measurement parameters.
Instructions for setting up simulation modes and editing values.
Explains scale correction for linearizing sensor/converter measurements and defining segments.
Describes the relative measurement function for canceling constant or spurious values.
Enables the use of sensors with calibration coefficients taken into account during measurement.
Procedure for configuring default value points used in synthesizer mode.
Instructions for saving current measurements, setting up acquisition parameters, and triggering recording.
Explains how to configure synthesizer points, identical to default values.
Guides on setting first/last points, duration, repetitions, and delay for synthesis.
Procedure to adjust the display contrast using the configuration menu.
Instructions for setting the instrument's date and time.
Configuration options for filtering, resolution, lighting, beeping, language, and units.
Guides on applying filters to stabilize displayed measurements in noisy conditions.
Allows selection of high, medium, or low display resolution for measurements.
Control the duration of the display backlight (manual, 10s, or 1min).
Enables key beep feedback, language selection, and temperature unit settings.
Guides on performing regular checks and handling operations under specific reference conditions.
Steps to adjust the instrument using a maintenance menu and password.
Provides access to instrument details like serial number, software version, and company name.
Step-by-step guide for updating the instrument's firmware using the UPG32 program.
Details specifications for measuring voltage and temperature with thermocouples.
Specifies gauge, measurement range, resolution, and precision for constant voltage.
Details specifications for emitting voltage and temperature signals with thermocouples.
Specifies gauge, measurement range, resolution, and precision for constant voltage emission.
Provides specifications for resistance and temperature measurement using resistive sensors.
Details gauge, scope, resolution, and precision for resistance measurement.
Provides specifications for simulating resistance and temperature with resistive sensors.
Details gauge, scope, resolution, current range, and precision for resistance simulation.
