AOIP TC6621 - Measurement and Simulation Terminals

Power-up B
NTA47230-300A6 63 / 101
B.1.4 The measuring and simulation terminals for each device
Both the TC6621 and TM6602 are fitted with 2 safety bushes (4 mm in diameter) and a miniature flat plug for
thermocouples. These connector assemblies are used both in measurement and emission modes (non simultaneous).
Both the TC6622 and TM6612 are fitted with 4 safety bushes (4 mm in diameter) and a 4-pt circular connector. These
connector assemblies are used both in measurement and emission modes (non simultaneous).
HOLD key
F1 function key
CLEAR key
Navigation key
ON/OFF key
Confirmation key
(VAL)
F2 function key
Positive terminal in
measurement and
emission
Negative terminal in
measurement and emission
Positive terminal in
measurement and
emission
Negative terminal in
measurement and
emission