③ In AVR mode, you still need to push down the
power button to save the recording files when you
finished recording.
④ AVR Level: It means the level of sensitivity, form
grade 1 to grade 6. Grade 6 is very sensitive, and can
capture any quiet voice( that is, normal ambient noise
will activate recording ).
① Turn on the AVR switch.
② You can select the different levels of AVR
according to the different environment.
1.4 AVR mode
1.5 Monitor
Start Time: Press ‘∧/∨’to set the time you want to start
auto recording, press Play/Pause to confirm the time.
End Time: Press ‘∧/∨’to set the time you want to save
your auto recording.
Note: Please confirm or synchronized the system time of
device.
AVR switch: Turn on/off the AVR function.
It is off by default. After you turn it on, you can use
headphone to listen to the recording when recording.
Note: Please do not use this function in important
lectures or meetings. It may skipped or lost some
important words due to low DB.
9
To Next Page
