EasyManua.ls Logo

AOMWAY Commander V1S - DVR Usage Restrictions; 6. HEAD TRACKER; Head Tracker Setup and Modes; Head Tracker Direction Control

AOMWAY Commander V1S
15 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
AOMWAY10VISIONSYSTEMS
WWW.AOMWAY.COM
DVR is only used for analog recording under RF/ AV in
mode,notavailableforHDrecording;
DVRcanautosavefileifthepowerisaccidentlyshutoff.
6.HEADTRACKER:
Hereheadtrackerismodularized,defaulttouseCH7,CH8
on radio controller; then pan, tilt servo cable must be
connectedtoCH7,CH8onreceiversideaswell;
Note that this head tracking system has two operation
modes:onefor360degreebrushlessgimbalsandanotherfor
90 degree pan/tilt servos. Press and hold Key①before
power on, after 3s, you will hear buzzer beeping twice, and
thenreleasethebuttontoswitchmodeonce.Whenpoweron,
itstaysonlasttimesavedmode.
Connectgogglestoradiocontroller:firstlypoweroffyour
radiocontrollerthenhavetrainercable’soneendpluggedinto
goggles’ PS2 data port and another end plugged into radio
controller;
Switch on radio controller, set up the trainer function,
activate CH7 and CH8; long press Key①for 3s to activate
head tracker, when goggles moves at pan, tilt direction, the
servowillmovetothesamedirection;
Iftheservomovingdirectionisopposite,longpressKey
① for 5s to change direction once in following order: 1.
reverse pan and tilt direction; 2. reverse tilt direction;
3.reversepandirection;4.backtodefault.
Ifheadtrackingfunctiondoesnotwork,pleasecheck
radiocontrollerchannelandservosetup;