AOpen QF13 User Manual

(1) Insert Acer Wireless Projection Kit (UWA5 Wi-Fi dongle) into the WIRELESS KIT
port on the projector.
(Remark: The Wi-Fi dongle cannot be removed after plugging-in)
(2) Plug the power adaptor in your projector. Charge your projector by 3 hours at 1st
time usage.
(3) To turn on projector, long press the power
button on projector for 3 seconds.
(4) Adjust focus ring until the projection
image is clear and focused.
(5) Select your preferred start-up language.
(6) Use remote control to set up Wi-Fi .
(7) After starting up, enter the below home
menu and select the functions by arrow keys
on the projector or remote control: Android, iOS, MacOS, Windows,Bluetooth,
EZCast, Media, HDMI, and Setting.
(8) To turn off projector, long press the power button of the projector for 3 seconds or
press power key on remote control directly.
Operating Instructions
1. Preparation at 1st time usage
2. About “Setting”
Use your remote control to select “Setting” on home menu of projector, and
press “ENTER” to confirm.
(1) Wi-Fi setting: Select the “Wi-Fi setting” menu and enter the Wi-Fi setting
interface, select the "Internet", press “ENTER” key to confirm, and select the
router from AP list and enter the password.

AOpen QF13 Specifications

General

Brand	AOpen
Model	QF13
Category	Projector
Language	English