7
Observe the safety guidelines when towing!
Separating the vehicles
First, secure both vehicles from rolling away. Now the tow hooks
① and ④ can be disconnected from the towing lugs. For this
purpose press the bolts ② inward and release the tow hook ① by sliding on the tow bar ③from the towing lug. It may also be
necessary to disconnect the tow bar ③ from the centre piece ⑤ . For this purpose press the bolts ⑥ inward and slide the centre
piece
⑤ correspondingly. Proceed in the same manner on the other end of the tow bar.
Place all parts of the tow bar into the transport bag after completing the towing process.
6 .MAINTENANCE AND CARE
7. NOTES REGARDING ENVIRONMENTAL PROTECTION
Please dispose of this device via the recycling bin or the public/municipal collection points.
The materials can be recycled. You make an important contribution to protecting our environment by recycling,
material utilisation or other forms of reusing waste equipment!
Clean the tow bar with a slightly damp cloth and a mild detergent. Do not use harsh detergents, solvents or gasoline. Make sure
that no detergents or liquids are allowed penetrate into the tow bar.
Treat the bolts regularly with a light penetrating oil, e.g.. WD40.
Store the tow bar in a dry place.
8. CONTACT INFORMATION
EAL GmbH
Otto-Hausmann-Ring 107
42115 Wuppertal, Germany
+49 (0)202 42 92 83 0
+49 (0) 202 42 92 83 – 160
info@eal-vertrieb.com
www.eal-vertrieb.com
To Next Page
Loading...