Do you have a question about the Apache Manitou MX and is the answer not in the manual?
Lists nominal motor performance, voltage, operating temperature, and protection class.
Illustrates key eBike components like battery, motor, control unit, and sensors.
Emphasizes checking brakes and battery charge, and wearing a cycling helmet during rides.
Explains motor activation, speed limits, and behavior with brakes.
Advises on gear changes, overheating prevention, and battery charging after rides.
Details icons and indicators on the CODAC display for various functions.
Instructions for powering the system and adjusting assistance levels.
How to activate and use the walking assist feature for easier handling.
Explains changing displayed data, deleting temporary data, and adjusting parameters.
Explains the TFT display layout and how to switch it on/off.
How to adjust assistance levels and activate walking assistance on the TFT display.
Managing displayed data, background light, and parameter settings on the TFT.
Lists common error codes and their potential causes for the eBike.
Explains the layout and indicators of the LCD COMPACT display and its operation.
Instructions for powering the LCD display and the eBike system on and off.
Adjusting assistance, using walking assist, and changing data display on LCD.
Details on setting units, backlight, and other parameters for the LCD display.
Explains the LED indicators for assistance level and battery status.
Instructions for switching on/off, adjusting assistance, and using walking assistance with LEDs.
Advises on charging, storage, handling, and potential hazards of the battery.
Instructions for switching, handling, and checking the charge status of the frame battery.
Instructions for ejecting, locking, and checking the charge status of the seat tube battery.
Instructions for removing, inserting, and checking the charge status of the rack battery.
Recommends initial full charging cycles and optimal charging procedures.
Details the charging steps and stresses using the correct charger.
Lists key factors like terrain, weather, rider weight, and tire pressure.
Advises on eBike maintenance, tire pressure, and gear selection for extended range.
Outlines regulations for transport and optimal conditions for battery storage.
Detailed steps for removing and installing the front or rear wheel with the motor.
Emphasizes correct axle position, cable routing, and connector assembly for wheels.
Instructions for installing brake discs, including screw size warnings.
Warns against soaking parts, using pressure washers, and removing the battery before cleaning.
Lists recommended tasks like cleaning, greasing, checking fasteners, and cable condition.
Suggests specific products and contacting dealers for service and accessories.
Recommends inspection and details the procedure for raising complaints.
Outlines warranty periods for frame, components, and battery, plus conditions.
Instructs on proper disposal of eBike components to prevent environmental harm.
Provides manufacturer information, product designation, and model year.
Declares compliance with EU directives and technical standards for the eBike.