APART CM6TSMF - Safety Precautions

Instruction manualCM6TSMF
5
Safety precautions
• Keep this manual for future reference
• When making the hole in your mounting panel to mount the
Apart CM6TSMF speaker, make sure there is sufficient clearance
behind the panel (no obstructions like AC power lines etc)
• Take care of your speaker wires; they should be free of damage.
Damaged speaker wires may result in poor sound quality and
can damage amplifiers
• Only use accessories specified by the manufacturer
• Make sure the mounting panel can support the speaker’s
weight
• Use a sufficient amount of speakers to avoid dead-spots
• No mains power can be connected to the loudspeakers, doing
so will damage the speaker
• This apparatus should only be serviced by qualified personnel. If
not serviced by qualified personnel, warranty may be void
• Use cable of the right gauge, especially for long runs
• Use cables with clear color indication and maintain polarity
throughout the whole system
• Avoid loud feedback from microphones, as it can damage your
speaker
• Please check the packing for any kind of damage upon
reception of the goods. If the packing is damaged, please
contact your local dealer before opening it
• Please note that this speaker is designed for indoor use only!