Mounting the loudspeaker
The loudspeaker is very easy to install, due to the all metal
mounting system.
Using the cutout template:
Note: when making the hole in your mounting panel, double
check if there are no cables or any other obstructions behind the
mounting panel. Cutting the mounting panel without this check
might result in damaged infrastructure or power lines.
The metal backcan has 4 predrilled holes Ø 20 mm, 3 of them
covered with removable metal plates and one 8 mm hole to mount
additional safety hardware.
Recommended applications
• Hallways
• Boutiques and shops
• Board rooms & Offices
• Emergency and evacuation systems
• ...
To Next Page
Loading...
