Safety instructions
• Keep this manual for future reference.
• Take care of your speaker wires, they should be free of damage.
Damaged speaker wires might result in poor sound quality and
can damage amplifiers.
• Only use accessories specified by the manufacturer
• Make sure the mounting panel can support the speakers
weight.
• Use sufficient amount of speakers to avoid dead spots.
• No mains power shall be connected to the loudspeakers, doing
so will damage the speaker.
• This apparatus should only be serviced by qualified personnel. If
not warranty might be void.
• Use cable of the right gauge, certainly for long runs.
• Use cables with clear color indication and maintain polarity
throughout the whole system.
• Avoid loud feedback from microphones, this can damage your
speaker.
• Please check the units condition after unpacking. If the outside
of the carton box has been damaged, inform your shipper
immediately.
To Next Page
Loading...
