APART COLS41 - Connecting the Loudspeaker; Internal Connector Colour Code

Instruction manualColumn Series
9
Colour code internal connector
Low impedance applications:
Common: black
Lo-Z connection: white
100 volt applications:
Common: black
Brown: DO NOT USE!
Highest power tap: red
Medium power tap: yellow
Low power tap: green
70 volt applications:
Common: black
Highest power tap: brown
High power tap: red
Medium power tab: yellow
Low power tab: green
NOTES: You can only use 1 power tap at the same time: never
connect the speaker to a Lo-Z and 100 volt amplifier simultaneously
and never use multiple 100 volt taps at the same time. Connect the
speaker correctly as required and don’t connect the unused wires.
Example: for use as a lo-Z speaker, connect the black (negative) and
white (positive) wire.
Connecting the loudspeaker