APART E-VOL20 - E-VOLST Volume Control Overview; E-VOLST Technical Specifications

WWW.APART-AUDIO.COM
Volume Control
E-VOLST
• Type : Euro
• Handling power : 2 x 40 watt
• Impedance : Minimum 2 x 4 Ohm
• 24V priority : No
• Attenuation steps : 10
• Build-on box : E-2MODON
• Build-in box : NA
• Dimensions (H x W x D) : 80 x 80 x 76 mm
• Weight : 0.32 Kg
• Colour : white
Introduction
Tech. Specifications
The APart E-VOLST is a stereo volume control that can handle up to 2 x 40 watt in 4 ohm.
It can be used with a standard HiFi amplier to adjust the loudspeaker volume. It is very durable due to the step by
step attenuation in 10 steps.
The E-VOLST is build on a universal chassis that can easily be integrated with Gira, Jung and Euro.
Different cover plates are available for the UK market.
• Keep the inside of the wallbox clear of all wires, this to prevent short circuits between the wires in the wallbox and the
printed circuit of the volume controller.
• Don’t use solid copper conductor wires, the screw connectors on the printed circuit board of the volume
controller are designed for flexible wires.
• Don’t connect more then one wire in each onboard screw connectors of the volume controller.
• Don’t use force when mounting the volume controller in the wallbox.
Mounting