9
Note: All MASK models have a unique overload protection, which
is activated when the speakers are overloaded. When too much
power is fed into your MASK, first a red led will blink. When you
neglect this warning, the overload protection will disconnect the
signal going to the loudspeakers and the red led will remain on.
Turn down the level and after about 3 seconds cooling down the
signal will be reconnected to the loudspeakers.
- REMINDER -
Protection systems are not built to be activated all the time, they are
to warn you and to give you a safety margin!
• dynamic high power
• stereo Hi-Fi quality
• same volume in all zones
• max 8 cabinets on a stereo Hi-Fi amplifier
• different volume settings in all zones
• more than 8 cabinets on a stereo Hi-Fi amplifier
• Easy installation
To Next Page
Loading...
