Need help?Do you have a question about the APART PA8250 and is the answer not in the manual?
General| Power per channel @ 8 ohms | 250 W |
|---|---|
| Minimum impedance | 4 ohms |
| S/N Ratio | > 100 dB |
| THD | < 0.1% |
| Damping Factor | > 200 |
| Frequency Response | 20 Hz - 20 kHz |
| Protection | Short circuit, Overload |
| Power Supply | 230 VAC / 50 Hz |
| Input Impedance | 20 kΩ |
| Cooling | Fan |
Controls for powering the unit on/off and status indication.
Individual channel level adjustment and status monitoring for limit, signal, and protection.
Fuse replacement and input signal linking functionality.
Connectors for balanced and unbalanced audio sources.
Switches for filtering, stereo/mono, and bridge mode operations.
Output terminals for connecting speakers, with impedance notes.
Switch to resolve audio ground loop issues.
To Next Page
