Need help?Do you have a question about the APART REVAMP2250 and is the answer not in the manual?
Essential safety guidelines for installation, operation, and handling of the amplifier.
Warning about high sound levels, hearing loss risks, and general handling precautions.
Important warnings regarding operating environment, cover removal, input/output connections, and application limitations.
Lists key features like rack unit height, class-D modules, bridgeable channels, and output power.
Details on input attenuators, protection circuits, mute buttons, and APC limiter function.
Explanation of front panel elements: overload LEDs, input gain, and DSP selector.
Details on various speaker outputs (Euroblock, Speakon) and audio input connectors.
Information regarding the connection of the mains power cord to the unit.
Explains the power switch, power LED, and status indicators for channel mute and signal presence.
Details on CLIP/OVERLOAD, LIMIT/MUTED, and SIGNAL LEDs for channel operation.
Overview of DSP settings and detailed descriptions of various audio signal routing modes.
Explains bridged mode and combined DSP configurations for specific audio setups.
Critical details on convectional cooling, rack mounting, ventilation, and ambient temperature.
Instructions on how to set the unit for 110/115 VAC operation using a wire jumper.
Comprehensive list of technical specifications including power, impedance, sensitivity, and frequency response.
Details on cooling, power consumption, dimensions, net weight, and operating voltage range.
Essential safety guidelines for installation, operation, and handling of the amplifier.
Warning about high sound levels, hearing loss risks, and general handling precautions.
Important warnings regarding operating environment, cover removal, input/output connections, and application limitations.
Lists key features like rack unit height, class-D modules, bridgeable channels, and output power.
Details on input attenuators, protection circuits, mute buttons, and APC limiter function.
Explanation of front panel elements: overload LEDs, input gain, and DSP selector.
Details on various speaker outputs (Euroblock, Speakon) and audio input connectors.
Information regarding the connection of the mains power cord to the unit.
Explains the power switch, power LED, and status indicators for channel mute and signal presence.
Details on CLIP/OVERLOAD, LIMIT/MUTED, and SIGNAL LEDs for channel operation.
Overview of DSP settings and detailed descriptions of various audio signal routing modes.
Explains bridged mode and combined DSP configurations for specific audio setups.
Critical details on convectional cooling, rack mounting, ventilation, and ambient temperature.
Instructions on how to set the unit for 110/115 VAC operation using a wire jumper.
Comprehensive list of technical specifications including power, impedance, sensitivity, and frequency response.
Details on cooling, power consumption, dimensions, net weight, and operating voltage range.
General| RMS Power 4 ohms | 2 x 250 W |
|---|---|
| RMS Power 8 ohms | 2 x 150 W |
| RMS Power bridged 8 ohms | 1 x 500 W |
| Minimum Impedance Unbridged | 4 ohms |
| Minimum Impedance Bridged | 8 ohms |
| Signal to Noise Ratio | > 100 dB |
| Damping Factor | > 200 |
| Type | Power Amplifier |
| Frequency Response | 20 Hz - 20 kHz |
| Input Sensitivity | 1.4V |
| Input Impedance | 20 kohms |
| Protection Circuits | DC, Short circuit, Overload, Thermal |
| THD | <0.05% (1kHz) |
To Next Page
