Need help?Do you have a question about the APART Champ-2 and is the answer not in the manual?
General| Impedance | 4 Ω |
|---|---|
| Frequency range | 10 - 50000 Hz |
| Total Harmonic Distortion (THD) | 0.05 % |
| Connectivity technology | Wired |
| Product color | Black |
| Package depth | 550 mm |
| Package width | 560 mm |
| Package height | 100 mm |
| Dimensions (WxDxH) | 483 x 360 x 44 mm |
| Power requirements | 230V AC, 50Hz |
| Package weight | 9000 g |
Weight and Dimensions| Weight | 7500 g |
|---|
Covers volume potentiometer, signal, APC, clip, and temperature LEDs for channel 1.
Indicates when the amplifier is operating in bridge mode.
Controls the unit's power and indicates mains power presence.
Covers volume potentiometer and signal, APC, clip, and temperature LEDs for channel 2.
Details unbalanced cinch and balanced XLR inputs, impedance selector, and speaker binding post for channel 2.
Explains ground lift function and the mains power input socket with fuse holder.
Details speaker binding post and unbalanced cinch inputs for channel 1.
Instructions for converting to mono bridge mode and setting the impedance selector.
Details balanced XLR and unbalanced cinch inputs for channel 1 in bridge mode.
Presents output power ratings for dynamic program and sine wave in various modes.
Lists input impedance, frequency response, THD, IMD, gain, damping factor, and circuit design.
Details net and gross dimensions, net and gross weight of the amplifier.
To Next Page
