Need help?Do you have a question about the APART REVAMP4100 and is the answer not in the manual?
General| Power Output (4 Ohms) | 4 x 100W |
|---|---|
| Bridged Power (8 Ohms) | 2 x 200W |
| Number of Channels | 4 |
| Frequency Response | 20 Hz - 20 kHz |
| Total Harmonic Distortion (THD) | < 0.05% |
| Power Consumption | 400 W |
| Minimum Impedance | 4 Ohms |
| Minimum Impedance Bridged | 8 Ohms |
| THD+N | < 0.1% |
| Crosstalk | > 70 dB |
| Input Sensitivity | 0.775V |
| Damping Factor | >200 |
| Protection Circuits | DC, Short Circuit, Overheat |
| Cooling | Fan |
| Power Supply | 230V AC 50/60Hz |
| Dimensions | 483 x 88 x 420 mm |
| Mountable | Yes, 19" rack mountable |
Important warnings regarding handling, damage inspection, and potential hearing loss from high sound levels.
Instructions on connecting, operating, and maintaining the unit safely, including avoiding liquid spills and cover removal.
Lists key features such as rack unit height, power output, cooling, and protection circuits.
Explains overload indicators and input gain settings for channels 3 and 4.
Describes the mode selector for channels 3 & 4 and their speaker outputs.
Explains overload indicators and input gain settings for channels 1 and 2.
Describes the mode selector for channels 1 & 2 and their speaker outputs.
Details unbalanced RCA cinch and balanced Euroblock inputs for all channels.
Covers remaining speaker outputs and the mains power connection.
Describes the power switch, status LEDs (signal, limit, overload), and mute switches for each channel.
Explains the LEDs indicating bridged mode operation for channel pairs.
Critical information on convectional cooling, rack installation, ventilation, and ambient temperature limits.
Notes on intended use (fixed installations) and details for mains fuse replacement.
Details rack mounting, dimensions, power supply, consumption, and output power ratings.
Covers input sensitivity, impedance, frequency response, S/N ratio, and channel separation.
To Next Page
