Apator NORAX 3 - Page 4

4/ 6
Displayed measurement data in case of manual display sequence:
8.8.8.8
Display test
96.1.0.
Serial number
1.8.0.
Active imported energy, sum over all phases
2.8.0.
Active exported energy, sum over all phases
15.8.0.
Sum of absolute value of active energy per phase A = |AL1|+|AL2|+|AL3|
31.7.0.
Instantaneous current, phase L1
32.7.0.
Instantaneous voltage, phase L1
51.7.0.
Instantaneous current, phase L2
52.7.0.
Instantaneous voltage, phase L2
71.7.0.
Instantaneous current, phase L1
72.7.0.
Instantaneous voltage, phase L3
F.F.9.
LR Error Codes - Basic Error Registry
F.F.0.
NLR Error Codes - Extended Error Registry
F.F.9. – Errors reported by the LR firmware
00000001 – removal of the terminal box
cover was recorded
00000002 – meter housing opening event
was recorded
00000004 – a magnetic field influencing was
recorded
00000010 – low battery
00000020 – measurement system error
00000040 – incorrect phase sequence
00000100 – critical data error in internal
non-volatile memory
00000200 – external memory error
00001000 – NLR application validation error
00002000 – NLR application error
F.F.0. – Errors reported by the NLR firmware
00000001 – clock setting is uncertain
00000002 – low battery voltage (battery
needs to be replaced)
00000400 – counter memory error
00000800 – measurement system error
00002000 – communication module error
(wM-Bus)
Errors are coded on the last
4 digits.