®
USER’S GUIDE
network management card
4
Types of user accounts
The Management Card has two levels of access (Administrator and Device
Manager), both of which are protected by Password and User Name
requirements.
• An Administrator can use all of the management menus available in
the control console and the Web interface. The Administrator’s default
User Name and Password are both apc.
• A Device Manager can use only these menus:
–The Device Manager menu and its sub-menus in the control
console, and all menus in the top section of the navigation panel of
the Web Interface (System, Power Modules, Distribution,
Batteries, I/O)
– the Log option in the Events menu and in the Data menu in the
Web interface. (A Device Manager can also access the Event Log in
the control console by pressing
CTRL-L)
A Device Manager cannot access the Network menu or the System
menu that are in the second part of the navigation panel in the Web
interface and are sub-menus of the main Control Console menu in
the control console.
The Device Manager’s default User Name is device, and the default
Password is apc.
For information about how to set Administrator and Device
Manager User Name and Password settings, see User
Manager.
To Next Page
Loading...
Need help?
General
