Need help?Do you have a question about the APC Automatic Transfer and is the answer not in the manual?
General| Frequency | 50/60 Hz |
|---|---|
| Form Factor | Rack-mountable |
| Dimensions | Varies by model |
| Weight | Varies by model |
| Network Management | Optional |
| Humidity | 0 - 95% RH, non-condensing |
| Operating Temperature | 0°C to 40°C |
Provides information on accessing manuals and user guides for the Automatic Transfer Switch.
Instructions on recycling shipping materials for environmental consciousness.
Procedures for inspecting the package and contents for damage or missing parts upon receipt.
Details the components included with the Automatic Transfer Switch, illustrating the unit and accessories.
Describes the components and functions of the Automatic Transfer Switch's front panel, including LEDs and ports.
Instructions for attaching the left and right mounting brackets to the Automatic Transfer Switch unit.
Steps to disassemble adjustable brackets for installation in different rack types.
Guidance on inserting and aligning rear segments of the adjustable bracket with rack mounting rails.
Instructions for attaching the front segments of the adjustable bracket to the sides of the switch.
Detailed steps for securely mounting the Automatic Transfer Switch into an enclosure or rack.
Outlines the necessary TCP/IP settings required for the Automatic Transfer Switch to operate on a network.
Lists various methods for configuring the Automatic Transfer Switch's TCP/IP settings.
Explains how to use the Device IP Configuration Wizard to discover and configure the switch's TCP/IP settings.
Details how the switch uses BOOTP and DHCP for automatic TCP/IP settings configuration.
Describes the process of using a BOOTP server to configure TCP/IP settings for the Automatic Transfer Switch.
Explains how to use a DHCP server for automatic TCP/IP settings configuration for the Automatic Transfer Switch.
Provides step-by-step instructions for accessing the control console via a local serial connection.
Introduces the different interfaces available to access and manage the Automatic Transfer Switch on a network.
Details how to access and use the Web interface for configuring the switch and viewing event logs.
Explains how to access the control console using Telnet for basic access and SSH for secure access.
Describes how to use SNMP for monitoring and accessing the Automatic Transfer Switch via a MIB browser.
Outlines using FTP and SCP for firmware transfers and accessing event logs, emphasizing security aspects.
Explains how to configure the ATS sensitivity to manage tolerance for power fluctuations and switching delays.
Details how to set narrow, medium, or wide voltage ranges for the ATS based on system power conditions.
Instructions on using ARP and Ping to assign IP addresses and access the control console remotely.
Step-by-step guide to reset the Network Management Card password, including console access and system settings.
Details the two-year warranty period, limitations, and APC's obligation for defective products.
Outlines warranty exclusions, disclaimers of implied warranties, and limitations on liability for damages.
Instructions on how to get support, find the serial number, contact customer support, and use RMA.
APC's recommendation against using products in life-support applications due to safety and effectiveness concerns.
Lists examples of life-support devices and clarifies APC's stance on their use with company products.
Compliance statement for Class A digital device according to FCC rules, regarding potential radio frequency interference.
Compliance statement for Class A digital apparatus according to Canadian ICES-003 regulations.
Compliance statement for Class A product based on the VCCI standard for radio disturbance in Japan.
Information on accessing APC's website for knowledge base, support requests, and localized information.
Lists phone numbers for APC Customer Support centers in various regions globally.
To Next Page