APC Network Management Card User Manual

34003641EN/AF - Page 11
1. Presentation
1.4 Technical characteristics
Functions
Supervision
Alarms
Protection of client stations
Network
Browsers
International
NMS
MIB
Configuration
Downloads
Characteristics
◗ Simultaneous connection of up to 15 browsers.
◗ Up to 500 events stored in memory with battery backup.
◗ Automatic refresh of the Properties page.
◗ Alarm notification via Browser (applet), email and SNMP (trap).
◗ Up to 50 protected stations.
◗ Fast ETHERNET 10/100 Mbits, auto-negotiation.
◗ HTTP 1.1, SNMP V1, TELNET, TFTP, NTP, BOOTP, DHCP.
◗ Simultaneous management of protocols.
◗ Microsoft Internet Explorer 5.x or higher.
◗ Netscape Navigator 6.x or higher.
◗ Web pages in English, French, German, Italian and Spanish.
◗ Automatic detection of browser language.
◗ Enterprise Power Manager (EPM).
◗ Standard MIB II.
◗ MGE V2.2 MIB.
◗ IETF MIB.
◗ Access via a password.
◗ Setting of parameters: IP, System, Date/time, Community name, etc.
◗ Single card or Multicard via the network using Mupgrade.
◗ Single card via TFTP or an RS232 serial link.

APC Network Management Card Specifications

General

Device Type	Network Management Card
Data Link Protocol	Ethernet, Fast Ethernet
Management Protocols	SNMP, HTTP, HTTPS, Telnet, SSH
Remote Management Protocol	HTTP, HTTPS, SSH, Telnet, SNMP
Security	RADIUS, Secure Shell (SSH), Secure Sockets Layer (SSL)
Form Factor	Plug-in module
Features	Event logging
Power Requirements	Via UPS
Environmental Monitoring	Temperature, humidity (with optional sensors)
Network Interface	10/100 Mbps Ethernet
Compatibility	Compatible with select APC Smart-UPS and Symmetra UPS models
Firmware Updates	Yes, via network or web interface