APC Network Management Card - List of parameters and default values

Page 12 - 34003641EN/AF
1. Presentation
1.5 List of parameters and default values
Functions
Network
System
Manager table
Parameters
◗ IP Address
◗ Subnet Mask
◗ Gateway Address
◗ Host
◗ Domain name
◗ Telnet Connection
◗ BOOTP/DHCP
◗ Network Upgrade
◗ Primary DNS Server
◗ Secondary DNS Server
◗ SMTP Server
◗ NTP Server
◗ UPS Contact
◗ UPS Location
◗ History Log Interval (sec)
◗ Refresh Rate (sec)
◗ Default Language
◗ Outputs name
◗ System stop duration (sec)
◗ Working time on battery (min)
before stop
Default values
◗ 172.17.xx.yy (see section 3.1)
◗ 255.255.0.0
◗ 0.0.0.0
◗ UPS xxxx
◗ ups.domain.com
◗ Enable
◗ Enable
◗ Enable
◗ 0.0.0.0
◗ 0.0.0.0
◗ smtpserver.domain.com
◗ 0.0.0.0
◗ Computer Room Manager
◗ Computer Room
◗ 60
◗ 10
◗ Auto
◗ Master/Group1/Group2
◗ 120
◗ 30
◗ (Empty list)
Possible values
◗ Network IP address
◗ Network IP address
◗ Network IP address
◗ Host name
◗ Domain name
◗ Enable/Disable
◗ Enable/Disable
◗ Enable/Disable
◗ Network IP address
◗ Network IP address
◗ IP address or DNS name
◗ Network IP address
◗ 32 characters max.
◗ 32 characters max.
◗ 20 to 99999
◗ 5 to 99999
◗ Auto/English/French/
German/Italian/Spanish
◗ 30 characters max.
◗ 0 to 9999
◗ 0 to 1092
◗ 50 max.
Remarks. Same password must be used to modify those parameters via internet browser, serial link or Telnet.