To Next Page

To Previous Page

34003641EN/AF - Page 21

3. Configuration

3.4 Restarting the card

Manually

◗ Press the Reset 8 button.

Via the serial link or Telnet

◗ Select the "Restart agent" command by entering 6.

◗ Then follow the instructions on the screen.

Via a browser

◗ Select the "System" command in the configuration menu.

◗ Click the "Reset communication" button.

◗ Enter the user name (MGEUPS by default) and the password (MGEUPS by default).

Remarks:

◗ The card is operational approximately 30 seconds after it is started.

◗ User customized parameters are not modified after a restart.

◗ Pressing the Reset 8 button does not modify any parameters.

Other manuals for APC Network Management Card

Questions and Answers:

Need help?

Do you have a question about the APC Network Management Card and is the answer not in the manual?

General

Device Type	Network Management Card
Data Link Protocol	Ethernet, Fast Ethernet
Management Protocols	SNMP, HTTP, HTTPS, Telnet, SSH
Remote Management Protocol	HTTP, HTTPS, SSH, Telnet, SNMP
Security	RADIUS, Secure Shell (SSH), Secure Sockets Layer (SSL)
Form Factor	Plug-in module
Features	Event logging
Power Requirements	Via UPS
Environmental Monitoring	Temperature, humidity (with optional sensors)
Network Interface	10/100 Mbps Ethernet
Compatibility	Compatible with select APC Smart-UPS and Symmetra UPS models
Firmware Updates	Yes, via network or web interface